|
|
| |
|
Rotor Spinning Frame RFS10
(Extracting) |
|
|
|
| Products |
 |
| [Suitable range] |
| Short Fiber Two-for-one Twister, one turning achieves two
twists. Its efficiency is higher than traditional machine in
times. Take-up volume increasing, no piecing in ten thousands
meter, twisting quality highly improved. |
| [Features] |
- The stable quality of spindle run
long-time even under high-speed operation;
- ouble-geared drive device, reasonable force load
transmitting, wider twist range;
- Adjustment system through Belt tension, ease operation.
- Pedal brake system, operation easy, extend the life of
belt and spindle;
- Winding completed or yarn broken, spindle support lift
automatic to avoid yarn grind;
- Oil-bath gearbox and special yarn guide curve, made
excellent winding form; The take-up tension on the roller
can adjust at ease. It is also suit for winding loose
packages for dyeing.
|
| [Technical Specification] |
|
Form of operation |
Double sides, single layer, manual guiding yarn (or
pneumatic) |
|
Spindle gauge |
225mm;254mm;290mm |
|
Section length |
2042mm |
|
Spindles per section |
18; 16; 14 |
|
Type of spindle |
φ 146; φ 166/ φ 146; φ 196 |
|
Balloon limiter |
Optional equipments |
|
Sections |
Basic mode 8 sections (max. 10) |
|
Spindle speed |
Standard configure (7000-12000rpm), special
requirements could deploy based on technological.
|
|
Twist range |
Standard configure (156-2027 T/M), special
requirements could deploy based on technological.
|
|
Twist direction |
S or Z |
|
Traverse |
152mm(6 ″ ) |
|
Angle of taper |
14 ?47 ′ -21 ?07 ′ |
|
feeding bobbin |
φ 37 ?170mm |
|
Winding bobbin |
3 ?30 ′ ,4 ?20 ′ ,5 ?57 ′ ,cone, cylinder, dyeing,
length 170mm |
|
Loading amount |
Max. 2.5kg |
|
Overall size |
(8 sections without upper blower) |
|
Motor power |
22kw(10 sections for 30kw) |
|
Start Mode |
Star-delta slow start |
|
Tensioner |
capsule |
|
Spindle driving |
belt circulation driving |
|
Cradle elevating |
mechanical | |
| [Overall dimension] |
 |
<%if not rs_pro.eof and not rs_pro.bof then
if int(pageno)=int(countpage) then
last=rs_pro.recordcount-1
else
last=(pageno-1)*pagesizes+pagesizes-1%><%end if%><%for i=begin to last%>
<%rs_pro.movenext%><%next%><%end if%><%rs_pro.close
set rs_pro=nothing%>
|
